Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER

RADIO RECEIVER > REMOVAL

for Preparation Click here



1. REMOVE FRONT PANEL GARNISH LH


    B280331
  1. Disengage the 3 clips and 8 guides to remove the front panel garnish LH as shown in the illustration.



2. REMOVE FRONT PANEL GARNISH RH


    B280332
  1. Disengage the 3 clips and 8 guides to remove the front panel garnish RH.



3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B281758
  1. Using a moulding remover, pry up on the center instrument cluster finish panel sub-assembly until there is enough of a gap to make it possible to pull on the panel by hand.



    B281757
  1. Pull the center instrument cluster finish panel sub-assembly in the direction indicated by the arrow to disengage the 7 clips and 2 guides to remove the center instrument cluster finish panel sub-assembly as shown in the illustration.



4. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    B281759
  1. Pull the No. 2 instrument panel register assembly in the direction indicated by the arrow to disengage the 4 clips as shown in the illustration.

  1. Disconnect the connector to remove the No. 2 instrument panel register assembly.



5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


  1. for Blank Type:



      B284922
    1. Disengage the 2 claws and remove the front console upper panel garnish as shown in the illustration.



  1. for 3 Switch Hole Type:



      B281752
    1. Disengage the 2 claws as shown in the illustration.

    2. Disconnect the each connector to remove the front console upper panel garnish.



6. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY


    E227930E01
  1. Apply protective tape to the area shown in the illustration.
    Text in Illustration 
    *1
    Protective Tape



    E227932
  1. Remove the 4 bolts.



    E227934
  1. Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 6 clips.

  1. Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.



7. REMOVE NO. 1 RADIO BRACKET


    E227935
  1. Remove the 5 screws and No. 1 radio bracket.



8. REMOVE NO. 2 RADIO BRACKET


    E230758
  1. Remove the 5 screws and No. 2 radio bracket.



9. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    E232140
  1. Disengage the 4 clips and guide, and remove the air conditioning control assembly as shown in the illustration.



10. REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)


11. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)