IGNITION SWITCH > INSTALLATION |
| 1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY |
Engage the 2 claws to install the ignition or starter switch assembly.
| 2. INSTALL STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY |
Secure the steering column assembly in a vise.
![]() |
Temporarily install the steering column upper with switch bracket assembly to the steering column assembly with 2 new tapered-head bolts.
Tighten the 2 tapered-head bolts until the bolt heads break off.
| 3. INSTALL STEERING COLUMN ASSEMBLY |