OUTER REAR VIEW MIRROR GLASS > REMOVAL |
| 1. REMOVE OUTER MIRROR |
![]() |
Apply protective tape to the area shown in the illustration.
| *1 | Protective Tape |
Push the upper part of the mirror surface and tilt it.
![]() |
Using a moulding remover, disengage the 2 claws at the lower part of the outer mirror as shown in the illustration.
| *1 | Moulding Remover |
![]() |
Disengage the 2 guides as shown in the illustration.
![]() |
Disconnect the 2 connectors and remove the outer mirror.