HEADLIGHT DIMMER SWITCH > INSTALLATION |
| 1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY |
Engage the 3 claws to install the headlight dimmer switch assembly.
Connect the connector.
| 2. INSTALL TILT AND TELESCOPIC SWITCH (for Power Tilt and Power Telescopic Steering Column) |
Engage the claw to install the tilt and telescopic switch.
Connect the connector.
| 3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY |
![]() |
Engage the claw to install the windshield wiper switch assembly as shown in the illustration.
Connect each connector.
| 4. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY |