Home › Engine / Hybrid System ยท 1AZ-FE › ENGINE CONTROL › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A134904
  1. Remove the 2 nuts and No. 1 engine cover sub-assembly.



2. REMOVE IGNITION COIL ASSEMBLY


    A192492
  1. Disconnect the 4 ignition coil assembly connectors.

  1. Remove the 4 bolts and 4 ignition coil assemblies.



3. REMOVE SPARK PLUG


    A192493
  1. Remove the 4 spark plugs.