OIL PUMP > REASSEMBLY |
| 1. INSTALL OIL PUMP COVER |
Coat the drive rotor and driven rotor with engine oil.
![]() |
Place the drive rotor and driven rotor into the oil pump body with the marks facing the pump cover side.
| *1 | Mark |
Install the oil pump cover with the 5 bolts.
| 2. INSTALL OIL PUMP RELIEF VALVE |
Coat the oil pump relief valve with engine oil.
Insert the oil pump relief valve and oil pump relief valve spring into the oil pump body hole.
Using a 27 mm socket wrench, install the oil pump relief valve plug.
| 3. INSTALL OIL PUMP STRAINER |
Install a new oil pump strainer gasket and the oil pump strainer with the 2 nuts.