Home › Engine / Hybrid System ยท 1AZ-FE › EMISSION CONTROL › PURGE VALVE

PURGE VALVE > INSTALLATION

for Preparation Click here



1. INSTALL PURGE VSV
  1. Install the purge VSV.



    A268180E02
  1. Connect the connector and 2 fuel vapor feed hoses.
    Text in Illustration 
    *a
    2 to 7 mm (0.0787 to 0.276 in.)
    *b
    90°
    *c
    Rear Side
    *d
    Upper Side
    *e
    RH Side
    *f
    Paint mark