PCV VALVE > INSTALLATION |
| 1. INSTALL VENTILATION VALVE SUB-ASSEMBLY |
Apply adhesive to 2 or 3 threads of the ventilation valve sub-assembly.
Using a ball joint lock nut wrench (22 mm), install the ventilation valve sub-assembly.
| 2. CONNECT NO. 2 VENTILATION HOSE |
Connect the No. 2 ventilation hose to the ventilation valve sub-assembly.
| 3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY |
Install the No. 1 engine cover sub-assembly with the 2 nuts.