Home › Engine / Hybrid System ยท 1AZ-FE › EMISSION CONTROL › PCV VALVE

PCV VALVE > INSPECTION

for Preparation Click here



1. INSPECT VENTILATION VALVE SUB-ASSEMBLY
  1. Install a clean hose to the ventilation valve sub-assembly.



  1. Check the ventilation valve sub-assembly operation.



      A260688E01
    1. Blow air into the cylinder head cover side, and check that air passes through easily.
      Text in Illustration 
      *1
      Hose
      *a
      Cylinder Head Cover Side
      *b
      Air

      CAUTION:
      Do not suck air through the valve.
      Petroleum substances inside the valve are hazardous to your health.

      If the result is not as specified, replace the ventilation valve sub-assembly.



    2. A260689E01
    3. Blow air into the intake manifold side, and check that air passes through with difficulty.
      Text in Illustration 
      *1
      Hose
      *a
      Intake Manifold Side
      *b
      Air

      CAUTION:
      Do not suck air through the valve.
      Petroleum substances inside the valve are hazardous to your health.

      If the result is not as specified, replace the ventilation valve sub-assembly.

  1. Remove the hose from the ventilation valve sub-assembly.