Home › Engine / Hybrid System ยท 1AZ-FE › ENGINE CONTROL › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    A112189
  1. Remove the 4 bolts and No. 1 exhaust manifold heat insulator.



2. REMOVE AIR FUEL RATIO SENSOR


    A264440
  1. Remove the hose clamp.

  1. Disconnect the air fuel ratio sensor connector.



    A264432E01
  1. Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly.

    SST
    09224-00010