DTC U0100 Lost Communication with ECM / PCM "A" |
| DTC No. | DTC Detection Condition | Trouble Area |
| U0100 |
| ECM |
| 1.CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC U0100) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Check if DTCs are output.
| Display (DTC Output) | Proceed to |
| U0100 | A |
| U0100 and other DTCs | B |
|
| ||||
| A | ||
| ||