Home › General › SPECIFICATIONS › 1AZ-FE FUEL

1AZ-FE FUEL > SERVICE DATA



Fuel pressure
Standard fuel pressure
304 to 343 kPa (3.1 to 3.5 kgf/cm2, 44 to 50 psi)
Fuel pressure : at fuel pressure remains for 5 minutes after engine has stopped
Standard fuel pressure
147 kPa (1.5 kgf/cm2, 21 psi) or more
Fuel injector assembly
Standard resistance
11.6 to 12.4 Ω at 20°C (68°F)
Injection volume
76 to 92 cc (4.6 to 5.6 cu. in.) per 15 seconds
Difference between each fuel injector
16 cc (1.0 cu. in.) or less
Standard leakage
1 drop or less per 12 minutes
Fuel pump
Standard resistance
0.2 to 3.0 Ω at 20°C (68°F)
Fuel sender gauge assembly
Standard resistance
13.5 to 16.5 Ω(Float level F)
13.5 to 414.5 Ω(Float level E to F)
405.5 to 414.5 Ω(Float level E)