Home › Drivetrain ยท U760E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE BOX ASSEMBLY



2. REMOVE FRONT DOOR SCUFF PLATE LH


    B278977
  1. Disengage the 10 claws and remove the front door scuff plate LH.



3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


    B278978
  1. Remove the clip.

  1. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.



4. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    B284921
  1. Disconnect the front door opening trim weatherstrip LH.



5. REMOVE INSTRUMENT SIDE PANEL LH


    B280320
  1. Using a moulding remover, disengage the 4 claws as shown in the illustration.



    B280322
  1. Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.



6. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    B279865
  1. Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.



7. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY


    B280327
  1. Remove the 2 bolts <B>.



  1. w/o Driver Side Knee Airbag:



      B281943
    1. Disengage the 5 clips and 3 guides to remove the instrument panel sub-assembly.



  1. w/ Driver Side Knee Airbag:



      B280328
    1. Disengage the 4 claws, 7 clips and 3 guides to remove the instrument panel sub-assembly.



8. REMOVE FRONT DOOR SCUFF PLATE RH

HINT:
Use the same procedure as for the LH side.



9. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



10. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    B284920
  1. Disconnect the front door opening trim weatherstrip RH.



11. REMOVE INSTRUMENT SIDE PANEL RH


    B281763
  1. Using a moulding remover, disengage the 4 claws as shown in the illustration.



    B281765
  1. Disengage the 3 guides to remove the instrument side panel RH as shown in the illustration.



12. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    B279888
  1. Disengage the 4 claws.

  1. Disengage the 2 guides.

  1. Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.



13. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    B281767
  1. Remove the bolt <B> and screw <C>.

  1. Open the lower instrument panel door.



    B281768
  1. Remove the 3 screws <C>.



    B281769
  1. Disengage the 2 clips, 4 guides and remove the lower instrument panel sub-assembly as shown in the illustration.



14. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


  1. for Blank Type:



      B284922
    1. Disengage the 2 claws and remove the front console upper panel garnish as shown in the illustration.



  1. for 3 Switch Hole Type:



      B281752
    1. Disengage the 2 claws as shown in the illustration.

    2. Disconnect the each connector to remove the front console upper panel garnish.



15. REMOVE FRONT ASH RECEPTACLE ASSEMBLY


    B281754
  1. Remove the 2 screws <C>.



    B281755
  1. Disengage the 2 clips as shown in the illustration.

  1. Disconnect each connector to remove the front ash receptacle assembly.



16. REMOVE FRONT NO. 2 CONSOLE BOX INSERT


  1. for LHD:



      B280290
    1. Disengage the 2 claws to disconnect the room temperature sensor from the front No. 2 console box insert.



    B281774
  1. Remove the 2 screws <C>.



    B281775
  1. Disengage the clip and 4 guides to remove the front No. 2 console box insert as shown in the illustration.



17. REMOVE CONSOLE BOX INSERT


  1. for RHD:



      B281942
    1. Disengage the 2 claws to disconnect the room temperature sensor from the console box insert.



    B281777
  1. Remove the 2 screws <C>.



    B281778
  1. Disengage the clip and 4 guides to remove the console box insert as shown in the illustration.



18. REMOVE FLOOR CARPET BRACKET LH


    E227160
  1. Remove the 2 clips.

  1. Disengage the 2 guides to remove the floor carpet bracket LH.



19. REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET


    C240460
  1. Remove the screw and No. 1 console box mounting bracket from the lower shift lever assembly.



20. REMOVE NO. 1 CONSOLE BOX DUCT


    C240461
  1. Remove the clip and No. 1 console box duct.



21. REMOVE LOWER SHIFT LEVER ASSEMBLY
  1. Move the shift lever to N.



    C239451
  1. Disconnect the end of transmission control cable assembly from the lower shift lever assembly.

  1. Disengage the 2 claws and disconnect the transmission control cable assembly from the lower shift lever assembly.



    C239452
  1. Disconnect the 3 clamps and 2 connectors.



    C239453
  1. Remove the 4 bolts and lower shift lever assembly.



22. REMOVE SHIFT LEVER SUPPORT


    C239454
  1. Remove the 4 bolts and shift lever support.