Home › Drivetrain ยท U241E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > REASSEMBLY

for Preparation Click here



1. INSTALL UPPER POSITION INDICATOR HOUSING


    C271758
  1. Engage the 4 claws to install the upper position indicator housing to the position indicator lens.



2. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER


    C239463
  1. Install the No. 2 position indicator slide cover to the position indicator slide cover.



3. INSTALL POSITION INDICATOR SLIDE COVER


    C239662
  1. Install the position indicator slide cover to the upper position indicator housing.



4. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY
  1. Install the cap to the bulb.

  1. Install the bulb to the indicator light wire sub-assembly.



    C239461
  1. Connect the 2 guides, clamp and bulb socket to install the indicator light wire sub-assembly to the upper position indicator housing.



5. INSTALL SHIFT LOCK RELEASE BUTTON (Shift Position Indicator Side)


    C240494
  1. Engage the claw to install the shift lock release button with the shift lock release spring.



    C240493
  1. Engage the 2 claws to install the position indicator plate.



6. INSTALL SHIFT POSITION INDICATOR


    C242180E01
  1. Install the shift position indicator with the 4 screws in the sequence shown in the illustration.



7. INSTALL SHIFT LOCK RELEASE BUTTON (Lower Shift Lever Assembly Side)


    C239456
  1. Engage the 2 claws to install the shift lock release button with the shift lock release spring.



8. INSTALL LOWER POSITION INDICATOR HOUSING


    C239455
  1. Engage the 5 claws to install the lower position indicator housing.