AIR FUEL RATIO SENSOR > INSPECTION |
| 1. INSPECT AIR FUEL RATIO SENSOR |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| E19-1 (HA1A) - E19-2 (+B) | 20°C (68°F) | 1.8 to 3.4 Ω |
| E19-1 (HA1A) - E19-4 (A1A-) | Always | 10 kΩ or higher |
| *a | Component without harness connected (Air Fuel Ratio Sensor) |