DTC P2610 ECM / PCM Internal Engine Off Timer Performance |
| DTC No. | DTC Detection Condition | Trouble Area |
| P2610 | ECM internal malfunction (2 trip detection logic). | ECM |

| Required Sensors/Components | ECM |
| Frequency of Operation | Once per driving cycle |
| Tester Display | Description |
| NORMAL |
|
| ABNORMAL |
|
| INCOMPLETE |
|
| N/A |
|
| 1.REPLACE ECM |
Replace the ECM (Click here).
| NEXT | |
| 2.CHECK WHETHER DTC OUTPUT RECURS (DTC P2610) |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the tester on.
Clear the DTCs (Click here).
Turn the engine switch off and wait for at least 30 seconds.
Turn the engine switch on (IG).
Turn the tester on.
Start the engine and wait for 10 minutes or more.
Enter the following menus: Powertrain / Engine / DTC.
If no pending DTC is output, the repair has been successfully completed.
| NEXT | ||
| ||