REAR SEAT ASSEMBLY (for Fold Down Seat Type) > REASSEMBLY |
| 1. INSTALL BENCH TYPE REAR SEAT CUSHION COVER |
Temporarily install the bench type rear seat cushion cover to the bench type rear seat cushion pad.
Using hog ring pliers, install 24 new hog rings.

Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 40 new hog rings.

| 2. INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side) |
![]() |
Using hog ring pliers, install the separate type rear seatback cover with 6 new hog rings.
| 3. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side) |
Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly.
![]() |
Engage the 4 claws to install the 2 rear seat headrest supports.
![]() |
Engage the 2 hooks.
![]() |
Using hog ring pliers, install the 6 new hog rings.
![]() |
Engage the 2 hooks to install the separate type rear seatback cover with pad.
| 4. INSTALL REAR SEATBACK UPPER LOCK BEZEL (for LH Side) |
![]() |
Engage the 4 claws to install the rear seatback upper lock bezel.
| 5. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE (for LH Side) |
![]() |
Engage the guide.
Install the rear seat center shoulder belt guide with the 2 screws.
| 6. INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side) |
![]() |
Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 8 new hog rings.
![]() |
Using hog ring pliers, install 6 new hog rings.
| 7. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side) |
Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH.
![]() |
Engage the 4 claws to install the 2 front seat headrest supports.
![]() |
Engage the 2 hooks.
![]() |
Using hog ring pliers, install the rear separate type seatback cover with pad to the seatback frame with 7 new hog rings.
![]() |
Engage the 2 hooks to install the separate type rear seatback cover with pad.
| 8. INSTALL REAR SEATBACK UPPER LOCK BEZEL (for RH Side) |
![]() |
Engage the 4 claws to install the rear seatback upper lock bezel.
| 9. INSTALL REAR SEATBACK HINGE COVER (for RH Side) |
![]() |
Install the rear seatback hinge cover as shown in the illustration.
| 10. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side) |
![]() |
Engage the 2 claws to install the bush.
![]() |
Insert the guide.
Install the rear seat center armrest assembly with the bolt and washer.
| 11. INSTALL NO. 1 SEAT ARMREST CAP (for RH Side) |
![]() |
Engage the 3 claws to install the No. 1 seat armrest cap.
| 12. INSTALL REAR SEAT SHOULDER BELT GUIDE LH |
![]() |
Engage the guide.
Install the rear seat shoulder belt guide LH with the 2 screws.
| 13. INSTALL REAR SEAT SHOULDER BELT GUIDE RH |
![]() |
Engage the guide.
Install the rear seat shoulder belt guide RH with the 2 screws.