Home › Vehicle Interior › POWER OUTLETS (INT) › CIGARETTE LIGHTER

CIGARETTE LIGHTER > INSTALLATION

for Preparation Click here



1. INSTALL CIGARETTE LIGHTER ASSEMBLY


    E228600
  1. Install the cigarette lighter socket and cigarette lighter retainer.



    E227913
  1. Turn the cigarette lighter nut in the direction indicated by the arrow to install it.

  1. Connect the connector.

  1. Engage the clamp.



    E227909
  1. Install the cigarette lighter knob and element assembly.



2. INSTALL FRONT ASH RECEPTACLE ASSEMBLY
  1. Connect each connector.



    B281756
  1. Engage the 2 clips.

  1. Install the front ash receptacle assembly with the 2 screws <C>.



3. INSTALL FRONT CONSOLE UPPER PANEL GARNISH


  1. for Blank Type:



      B284923
    1. Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.



  1. for 3 Switch Hole Type:

    1. Connect each connector.



    2. B281753
    3. Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.



4. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY
  1. Connect each connector.



    B280334
  1. Engage the 6 clips to install the rear console upper panel sub-assembly.

  1. Move the shift lever to P.



5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B281912
  1. Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.



6. INSTALL FRONT PANEL GARNISH RH


    B280333
  1. Engage the 3 clips and 8 guides to install the front panel garnish RH.



7. INSTALL FRONT PANEL GARNISH LH


    B281945
  1. Engage the 3 clips and 8 guides to install the front panel garnish LH.