Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM

THEFT DETERRENT SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



OUTLINE OF THEFT DETERRENT SYSTEM
  1. The theft deterrent system can be set/cancelled by locking/unlocking the doors using the following operation:
    1. Entry lock operation
    2. Wireless lock operation
    3. Key-linked lock operation

      HINT:


      w/ Wireless Door Lock Buzzer Answer Back Function and Smart Entry and Start System
      w/ Wireless Door Lock Buzzer Answer Back Function and w/o Smart Entry and Start System
      w/o Wireless Door Lock Buzzer Answer Back Function and w/ Smart Entry and Start System
      w/o Wireless Door Lock Buzzer Answer Back Function and Smart Entry and Start System
      Entry lock operation
      ○
      -
      ○
      -
      Wireless lock operation
      ○
      ○
      ○
      ○
      Key-linked lock operation
      ○
      ○
      -
      (○*)
      -
      1. *: This function is set through the customize function (Click here).
      1. ○: Available
      2. -: Not available

  2. The alarm function will be activated when someone attempts to forcibly unlock any of the doors or open any of the doors, engine hood and luggage compartment door while the system is in the armed state.
  3. In the alarm sounding state, the system blinks the hazard warning lights. At the same time, the system sounds the vehicle horns and security horn to deter break-in and theft as well as to warn people around the vehicle.
  4. The theft deterrent system has the active arming mode. There are 4 states; a disarmed state, an arming preparation state, an armed state and an alarm sounding state.
  1. Disarmed state:

    1. The alarm function is not operating.
    2. The theft deterrent system is not operating.

  2. Arming preparation state:

    1. The time until the system goes into the armed state.
    2. The theft deterrent system is not operating.

  3. Armed state:

    1. The theft deterrent system is operating.

  4. Alarm sounding state:

    1. The alarm function is operating.

    Alarm time:
    Approx. 27.5 seconds


    Alarm Methods and Time 
    Alarm Method
    Hazard Warning Lights
    Blinking
    Vehicle Horns
    Sounding
    (approx. 0.4-second cycles)
    Security Horn
    Sounding
    (approx. 0.4-second cycles)
    Alarm Time
    Approx. 27.5 seconds


FUNCTION OF MAIN COMPONENTS

Component
Function
Security indicator light
Informs driver of theft deterrent system status.
Security horn
Sounds when attempted break-in or theft is detected.
Hazard warning lights
Blink when attempted break-in or theft is detected.
Vehicle horns
Sound when attempted break-in or theft is detected.
Door courtesy light switch
Detects door status (open or closed).
Door unlock detection switch
Detects door status (locked or unlocked).
Engine hood courtesy switch
Detects engine hood status (open or closed).
Luggage compartment door courtesy light switch
Detects luggage compartment door status (open or closed).
Certification ECU (smart key ECU assembly)*1
  1. Receives wireless door lock/unlock signal.
  2. Receives entry door lock/unlock signal.
Main body ECU (multiplex network body ECU)*2
Receives wireless door lock/unlock signal.
  1. *1: w/ Smart Entry and Start System
  2. *2: w/o Smart Entry and Start System

ACTIVE ARMING MODE

HINT:
Active arming mode starts the alarm control immediately after the doors are locked.



  1. Active arming mode:
    This system operates as described in the diagram below when one of the items for each condition is met.


    B163417E20


    w/ Wireless Door Lock Buzzer Answer Back Function and Smart Entry and Start System 
    Condition
    Item
    Condition [1]
    In disarmed state 1, when the ignition switch is off, the system state is switched if the following condition is met:
    1. With all doors, the engine hood and luggage compartment door closed, all doors are locked by wireless operation, the smart entry and start system or key linked power door lock operation.
    In disarmed state 1, when the ignition switch is off, the engine hood and luggage compartment door are closed, and all doors are locked, the system state is switched if the following condition is met:
    1. All doors are closed when any door is opened.
    Condition [2]
    1. Allow approx. 30 seconds to elapse.
    Condition [3]
    1. All doors are unlocked by wireless operation, the smart entry and start system or key linked power door lock operation.
    2. Any door is unlocked.
    3. Any door is opened.
    4. The ignition switch is turned to ACC or ON.
    5. The battery is reconnected.
    Condition [4]
    1. The engine hood is opened when the engine hood is closed.
    2. The luggage compartment door is opened when the luggage compartment door is closed.
    3. The battery is reconnected.
    4. Any door is opened when all doors are closed.
    5. Any door is unlocked when all doors are locked.
    6. When 5 seconds or more have elapsed after the ignition switch is turned off, the ignition switch is turned to ON.
    Condition [5]
    1. The ignition switch is turned to ON and the engine is run for more than 2 seconds.
    2. All doors are unlocked by wireless operation, the smart entry and start system or key linked power door lock operation.
    3. The ignition switch is turned to ACC or ON within 5 seconds after the ignition switch was turned off.
    Condition [6]
    1. After approx. 27.5 seconds, alarm stops and system returns to armed state.
    Condition [7]
    1. The luggage compartment door is opened by wireless operation or the smart entry and start system.
    Condition [8]
    1. The luggage compartment door is closed when the engine hood is closed.
    2. The engine hood is closed when the luggage compartment door is closed.
    Condition [9]
    1. Any door is unlocked when all doors are locked.
    2. Any door is opened.
    3. The ignition switch is turned to ACC or ON.
    4. The battery is reconnected.
    5. All doors are unlocked by wireless operation, the smart entry and start system or key linked power door lock operation.
    Condition [10]
    In disarmed state 1, when the ignition switch is off, the system state is switched if the following condition is met:
    1. With all doors closed, and the engine hood and luggage compartment door opened, all doors are locked by wireless operation, the smart entry and start system or key linked power door lock operation.
    In disarmed state 1, when the ignition switch is off, all doors are locked, the engine hood and luggage compartment door are open, the system state is switched if the following condition is met:
    1. All doors are closed when any door is opened.
    Condition [11]
    1. The engine hood is opened.
    2. The luggage compartment door is opened.
    3. The luggage compartment door is opened by wireless operation or the smart entry and start system.

    w/ Wireless Door Lock Buzzer Answer Back Function and w/o Smart Entry and Start System 
    Condition
    Item
    Condition [1]
    In disarmed state 1, when the ignition switch is off, the system state is switched if the following condition is met when the key is not in the key cylinder:
    1. With all doors, the engine hood and luggage compartment door closed, all doors are locked by wireless operation or key linked power door lock operation.
    Condition [2]
    1. Allow approx. 30 seconds to elapse.
    Condition [3]
    1. All doors are unlocked by wireless operation or key linked power door lock operation.
    2. Any door is unlocked.
    3. Any door is opened.
    4. Key is in the key cylinder.
    5. The ignition switch is turned to ACC or ON.
    6. The battery is reconnected.
    Condition [4]
    1. The engine hood is opened when the engine hood is closed.
    2. The luggage compartment door is opened when the luggage compartment door is closed.
    3. The battery is reconnected.
    4. Any door is opened when all doors are closed.
    5. Any door is unlocked when all doors are locked.
    6. The ignition switch is turned to ON when the key is not in the key cylinder.
    Condition [5]
    1. The ignition switch is turned to ON and the engine is run for more than 2 seconds.
    2. All doors are unlocked by wireless operation or key linked power door lock operation.
    3. The ignition switch is turned to ACC or ON when the key is in the key cylinder.
    Condition [6]
    1. After approx. 27.5 seconds, alarm stops and system returns to armed state.
    Condition [7]
    1. The luggage compartment door is opened by wireless operation.
    Condition [8]
    1. The luggage compartment door is closed when the engine hood is closed.
    2. The engine hood is closed when the luggage compartment door is closed.
    Condition [9]
    1. Any door is unlocked when all doors are locked.
    2. Any door is opened.
    3. Key is in the key cylinder.
    4. The ignition switch is turned to ACC or ON.
    5. The battery is reconnected.
    6. All doors are unlocked by wireless operation or key linked power door lock operation.
    Condition [10]
    In disarmed state 1, when the ignition switch is off, the system state is switched if the following condition is met when the key is not in the key cylinder:
    1. With all doors closed, and the engine hood and luggage compartment door opened, all doors are locked by wireless operation or key linked power door lock operation.
    In disarmed state 1, when the ignition switch is off, all doors are locked, the engine hood and luggage compartment door are open, the system state is switched if the following condition is met when the key is not in the key cylinder:
    1. All doors are closed when any door is opened.
    Condition [11]
    1. The engine hood is opened.
    2. The luggage compartment door is opened.
    3. The luggage compartment door is opened by wireless operation.

    w/o Wireless Door Lock Buzzer Answer Back Function and w/ Smart Entry and Start System 
    Condition
    Item
    Condition [1]
    In disarmed state 1, when the ignition switch is off, the system state is switched if the following condition is met:
    1. With all doors, the engine hood and luggage compartment door closed, all doors are locked by wireless operation or the smart entry and start system.
    Condition [2]
    1. Allow approx. 30 seconds to elapse.
    Condition [3]
    1. All doors are unlocked by wireless operation, the smart entry and start system or key linked power door lock operation.
    2. Any door is unlocked.
    3. Any door is opened.
    4. The ignition switch is turned to ACC or ON.
    5. The battery is reconnected.
    Condition [4]
    1. The battery is reconnected.
    2. Any door is opened when all doors are closed.
    3. Any door is unlocked when all doors are locked.
    4. When 5 seconds or more have elapsed after the ignition switch is turned off, the ignition switch is turned to ON.
    5. The engine hood is opened.
    6. The luggage compartment door is opened.
    7. Any door is unlocked.
    Condition [5]
    1. The ignition switch is turned to ON and the engine is run for more than 2 seconds.
    2. All doors are unlocked by wireless operation, the smart entry and start system or key linked power door lock operation.
    Condition [6]
    1. After approx. 27.5 seconds, alarm stops and 5 seconds later system returns to armed state.
    Condition [7]
    1. The luggage compartment door is opened by wireless operation or the smart entry and start system.
    Condition [8]
    1. The luggage compartment door is closed when the engine hood is closed.
    2. The engine hood is closed when the luggage compartment door is closed.
    Condition [9]
    1. Any door is unlocked when all doors are locked.
    2. Any door is opened.
    3. The ignition switch is turned to ACC or ON.
    4. The battery is reconnected.
    5. All doors are unlocked by wireless operation, the smart entry and start system or key linked power door lock operation.
    Condition [10]
    In disarmed state 1, when the ignition switch is off, the system state is switched if the following condition is met:
    1. With all doors closed, and the engine hood and luggage compartment door opened, all doors are locked by wireless operation or the smart entry and start system.
    Condition [11]
    1. The engine hood is opened.
    2. The luggage compartment door is opened.
    3. The luggage compartment door is opened by wireless operation or the smart entry and start system.

    w/o Wireless Door Lock Buzzer Answer Back Function and Smart Entry and Start System 
    Condition
    Item
    Condition [1]
    In disarmed state 1, when the ignition switch is off, the system state is switched if the following condition is met when the key is not in the key cylinder:
    1. With all doors, the engine hood and luggage compartment door closed, all doors are locked by wireless operation.
    Condition [2]
    1. Allow approx. 30 seconds to elapse.
    Condition [3]
    1. All doors are unlocked by wireless operation.
    2. Any door is unlocked.
    3. Any door is opened.
    4. Key is in the key cylinder.
    5. The ignition switch is turned to ACC or ON.
    6. The battery is reconnected.
    Condition [4]
    1. The battery is reconnected.
    2. Any door is opened when all doors are closed.
    3. Any door is unlocked when all doors are locked.
    4. The engine hood is opened.
    5. The luggage compartment door is opened.
    6. Any door is unlocked.
    7. The ignition switch is turned to ON when the key is not in the key cylinder.
    Condition [5]
    1. The ignition switch is turned to ON and the engine is run for more than 2 seconds.
    2. All doors are unlocked by wireless operation.
    Condition [6]
    1. After approx. 27.5 seconds, alarm stops and 5 seconds later system returns to armed state.
    Condition [7]
    1. The luggage compartment door is opened by wireless operation.
    Condition [8]
    1. The luggage compartment door is closed when the engine hood is closed.
    2. The engine hood is closed when the luggage compartment door is closed.
    Condition [9]
    1. Any door is unlocked when all doors are locked.
    2. Any door is opened.
    3. Key is in the key cylinder.
    4. The ignition switch is turned to ACC or ON.
    5. The battery is reconnected.
    6. All doors are unlocked by wireless operation.
    Condition [10]
    In disarmed state 1, when the ignition switch is off, the system state is switched if the following condition is met when the key is not in the key cylinder:
    1. With all doors closed, and the engine hood and luggage compartment door opened, all doors are locked by wireless operation.
    Condition [11]
    1. The engine hood is opened.
    2. The luggage compartment door is opened.
    3. The luggage compartment door is opened by wireless operation.


FORCED DOOR LOCK CONTROL
  1. The forced door lock control prevents the vehicle from being tampered with. Immediately after a door is unlocked (armed starts), all doors are forced to lock by a forced door lock signal.

    1. If the following conditions are met, the forced door lock control is operated.

      1. The key is not in the key cylinder.*
      2. The theft deterrent system is in the armed state.
      3. Any door is unlocked.
      1. *: w/o Smart Entry and Start System


SECURITY INDICATOR LIGHT OUTPUT
  1. According to the state of the theft deterrent system the main body ECU (multiplex network body ECU) outputs a signal to turn the security indicator light on. However, some of the actual lighting conditions of the security indicator light are different from the output signals of the main body ECU (multiplex network body ECU).

    Output 
    State of Theft Deterrent System
    Security Indicator Light
    Output Signal from Main Body ECU (Multiplex Network Body ECU)
    Actual Lighting Condition
    Disarmed state (1), (2)
    OFF
    OFF (Engine immobiliser system unset)
    BLINKING (Engine immobiliser system set)
    Arming preparation state
    ON
    ON
    Armed state
    OFF
    BLINKING
    Alarm sounding state
    ON
    ON
    Blinking Cycle 
    Time
    Security Indicator Light
    0.125 sec.
    ON
    1.875 sec.
    OFF

    HINT:
    When the engine immobiliser system is set, the security indicator light blinks during both the disarmed state and the armed state, due to output signals from the engine immobiliser system.