Home › Drivetrain ยท U760E AUTOMATIC TRANSMISSION / TRANSAXLE › OIL PUMP

OIL PUMP > DISASSEMBLY

for Preparation Click here



1. INSPECT FRONT OIL PUMP ASSEMBLY


    C138512
  1. Turn the drive gear with 2 screwdrivers and make sure that it rotates smoothly.

    NOTICE:
    Be careful not to damage the oil seal lip.



2. REMOVE STATOR SHAFT ASSEMBLY


    C138275
  1. Using a T30 "TORX" socket wrench, remove the 16 "TORX" bolts and stator shaft assembly from the front oil pump and gear body sub-assembly.

    NOTICE:
    Keep the gears in the order of installation.



3. INSPECT CLEARANCE OF FRONT OIL PUMP AND GEAR BODY SUB-ASSEMBLY


  1. Inspect the body clearance.



      C138509
    1. Push the driven gear to one side of the body.

    2. Using a feeler gauge, measure the body clearance.

      Standard clearance:
      0.075 to 0.145 mm (0.00296 to 0.00570 in.)

      Maximum clearance:
      0.145 mm (0.00570 in.)

      If the clearance is more than the maximum, replace the drive gear, driven gear or front oil pump and gear body sub-assembly.



  1. Inspect the side clearance.



      C138511
    1. Using a straightedge and feeler gauge, measure the side clearance of both gears.

      Standard side clearance:
      0.025 to 0.040 mm (0.000985 to 0.00157 in.)

      Maximum side clearance:
      0.04 mm (0.00157 in.)

      If the clearance is more than the maximum, replace the drive gear, driven gear or front oil pump and gear body sub-assembly.

      HINT:
      There are 5 different thicknesses for the drive and driven gears.
      Drive Gear Thickness 
      Mark
      Thickness [mm (in.)]
      1
      11.547 to 11.555 (0.45461 to 0.45492)
      2
      11.555 to 11.563 (0.45493 to 0.45523)
      3
      11.564 to 11.571 (0.45528 to 0.45555)
      4
      11.572 to 11.579 (0.45559 to 0.45586)
      5
      11.580 to 11.587 (0.45591 to 0.45618)
      Driven Gear Thickness 
      Mark
      Thickness [mm (in.)]
      1
      11.547 to 11.555 (0.45461 to 0.45492)
      2
      11.555 to 11.563 (0.45493 to 0.45523)
      3
      11.564 to 11.571 (0.45528 to 0.45555)
      4
      11.572 to 11.579 (0.45559 to 0.45586)
      5
      11.580 to 11.587 (0.45591 to 0.45618)



4. REMOVE FRONT OIL PUMP DRIVE GEAR


    C138276
  1. Remove the front oil pump drive gear from the front oil pump body sub-assembly.



5. REMOVE FRONT OIL PUMP DRIVEN GEAR


    C138277
  1. Remove the front oil pump driven gear from the front oil pump body sub-assembly.



6. REMOVE FRONT OIL PUMP BODY O-RING


    C138278
  1. Remove the front pump body O-ring from the front oil pump body sub-assembly.



7. REMOVE FRONT OIL PUMP OIL SEAL


    C138508E01
  1. Fix the front oil pump body sub-assembly in a vise between aluminum plates.

    NOTICE:
    Do not overtighten the vise.

  1. Using SST, remove the front oil pump oil seal from the front oil pump body sub-assembly.

    SST
    09308-00010