OIL PUMP > DISASSEMBLY |
| 1. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY |
![]() |
Turn the drive gear with 2 screwdrivers and make sure that it rotates smoothly.
| 2. REMOVE STATOR SHAFT ASSEMBLY |
![]() |
Using a "TORX" socket wrench (T30), remove the 16 bolts and stator shaft assembly from the front oil pump body sub-assembly.
| 3. INSPECT CLEARANCE OF FRONT OIL PUMP AND GEAR BODY SUB-ASSEMBLY |
![]() |
Push the driven gear to one side of the body.
Using a feeler gauge, measure the clearance.
![]() |
Using a straightedge and feeler gauge, measure the side clearance of both gears.
| Mark | Thickness |
| 1 | 11.547 to 11.555 mm (0.4546 to 0.4549 in.) |
| 2 | 11.555 to 11.563 mm (0.4549 to 0.4552 in.) |
| 3 | 11.564 to 11.571 mm (0.4553 to 0.4556 in.) |
| 4 | 11.572 to 11.579 mm (0.4556 to 0.4559 in.) |
| 5 | 11.580 to 11.587 mm (0.4559 to 0.4562 in.) |
| Mark | Thickness |
| 1 | 11.547 to 11.555 mm (0.4546 to 0.4549 in.) |
| 2 | 11.555 to 11.563 mm (0.4549 to 0.4552 in.) |
| 3 | 11.564 to 11.571 mm (0.4553 to 0.4556 in.) |
| 4 | 11.572 to 11.579 mm (0.4556 to 0.4559 in.) |
| 5 | 11.580 to 11.587 mm (0.4559 to 0.4562 in.) |
| 4. REMOVE FRONT OIL PUMP BODY O-RING |
![]() |
Remove the O-ring from the front oil pump body sub-assembly.
| 5. REMOVE FRONT OIL PUMP DRIVE GEAR |
![]() |
Remove the front oil pump drive gear from the front oil pump body sub-assembly.
| 6. REMOVE FRONT OIL PUMP DRIVEN GEAR |
![]() |
Remove the front oil pump driven gear from the front oil pump body sub-assembly.
| 7. REMOVE FRONT OIL PUMP OIL SEAL |
![]() |
Secure the front oil pump body sub-assembly in a vise between aluminum plates.
Using SST, remove the front oil pump oil seal from the front oil pump body sub-assembly.