VALVE BODY ASSEMBLY > REASSEMBLY |
| 1. INSTALL SHIFT SOLENOID VALVE SL4 |
![]() |
Coat the shift solenoid valve SL4 with ATF.
Install the shift solenoid valve SL4 onto the transmission valve body assembly with the bolt and No. 4 solenoid lock plate.
| *1 | No. 4 Solenoid Lock Plate |
| *2 | Solenoid Valve SL4 |
| 2. INSTALL SHIFT SOLENOID VALVE SL3 |
![]() |
Coat the shift solenoid valve SL3 with ATF.
Install the shift solenoid valve SL3 onto the transmission valve body assembly with the bolt and No. 3 solenoid lock plate.
| *1 | No. 3 Solenoid Lock Plate |
| *2 | Solenoid Valve SL3 |
| 3. INSTALL SHIFT SOLENOID VALVE SLU |
![]() |
Coat the shift solenoid valve SLU with ATF.
Install the shift solenoid valve SLU onto the transmission valve body assembly.
| *1 | Lock Plate |
| *2 | Solenoid Valve SLT |
| *3 | Solenoid Valve SLU |
| 4. INSTALL SHIFT SOLENOID VALVE SLT |
Coat the shift solenoid valve SLT with ATF.
Install the shift solenoid valve SLT onto the transmission valve body assembly with the bolt and lock plate.
| 5. INSTALL SHIFT SOLENOID VALVE SL1 |
![]() |
Coat the shift solenoid valve SL1 with ATF.
Install the shift solenoid valve SL1 onto the transmission valve body assembly.
| *1 | No. 2 Solenoid Lock Plate |
| *2 | Clamp |
| *3 | Solenoid Valve SL2 |
| *4 | Solenoid Valve SL1 |
| 6. INSTALL SHIFT SOLENOID VALVE SL2 |
Coat the shift solenoid valve SL2 with ATF.
Install the shift solenoid valve SL2 onto the transmission valve body assembly with the 2 bolts, clamp and No. 2 solenoid lock plate.
| 7. INSTALL SHIFT SOLENOID VALVE SL |
![]() |
Coat the shift solenoid valve SL with ATF.
| *1 | Solenoid Valve SL |
Install the shift solenoid valve SL onto the transmission valve body assembly with the bolt.
| 8. INSTALL TRANSMISSION WIRE |
Install the transmission wire onto the transmission valve body assembly with the bolt and lock plate.
Coat the temperature sensor with ATF.
Connect the temperature sensor onto the transmission valve body assembly with the bolt and lock plate.
Engage the clamp and connect the transmission wire.
Connect the 7 connectors of the shift solenoid valve.
Connect the connector of the transmission revolution sensor.
| 9. INSTALL TRANSMISSION REVOLUTION SENSOR |
![]() |
Temporarily install the transmission revolution sensor onto the transmission valve body assembly with the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
Connect the connector of the transmission revolution sensor.