Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW MASTER SWITCH

POWER WINDOW MASTER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B281681
  1. Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.

  1. Disconnect each connector and remove the multiplex network master switch assembly with front door armrest base panel.



2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    B287905
  1. Remove the 3 screws and multiplex network master switch assembly from the front upper armrest base panel.