1AZ-FE BATTERY / CHARGING > TORQUE SPECIFICATIONS |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
| Bearing retainer plate x Generator drive end frame | 2.3 | 23 | 20 in.*lbf |
| Generator coil assembly x Generator drive end frame assembly | 5.9 | 60 | 52 in.*lbf |
| Cord clip x Generator coil assembly | 6.5 | 66 | 58 in.*lbf |
| Generator brush holder assembly x Generator coil assembly | 1.8 | 18 | 16 in.*lbf |
| Generator rear end cover x Generator coil assembly | 4.6 | 47 | 41 in.*lbf |
| Generator pulley with clutch x Generator rotor assembly ( ): For use with SST | 80 (57) | 816 (581) | 59 42 |
| Generator assembly x Cylinder block Bolt A | 52 | 530 | 38 |
| Generator assembly x Cylinder block Bolt B | 21 | 214 | 15 |
| Wire harness clamp bracket x Generator assembly | 8.0 | 82 | 71 in.*lbf |
| Generator wire x Terminal B | 9.8 | 100 | 87 in.*lbf |