Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 1AZ-FE)

COMPRESSOR (for 1AZ-FE) > INSPECTION

for Preparation Click here



1. INSPECT COMPRESSOR ASSEMBLY WITH PULLEY (COMPRESSOR SOLENOID)


    E229635E07
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    E74-1 (SOL-) - E74-2 (SOL+)
    20°C (68°F)
    10 to 11 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Compressor Assembly with Pulley (Compressor Solenoid))
    If the resistance is not as specified, replace the compressor assembly with pulley.