Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 1AZ-FE)

COMPRESSOR (for 1AZ-FE) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT COMPRESSOR FOR METALLIC SOUND
  1. Check if there is abnormal metallic sound from the compressor when the A/C switch is on and the compressor operates.
    If abnormal metallic sound is heard, replace the compressor assembly with pulley.



2. INSPECT REFRIGERANT PRESSURE

HINT:
(Click here)



3. INSPECT FOR LEAKAGE OF REFRIGERANT
  1. Using a gas leak detector, check for leakage of refrigerant.
    If there is any leakage, replace the compressor assembly with pulley.



4. INSPECT COMPRESSOR ASSEMBLY WITH PULLEY


  1. Check operation of compressor assembly with pulley.

    1. Start the engine.



    2. Inspect the compressor pulley.


      E230463E01


      Text in Illustration 
      *a
      Compressor Assembly with Pulley
      *b
      Pulley

      Standard:
      The compressor shaft rotates along with the pulley.

      If the result is not as specified, replace the compressor assembly with pulley.