Home › Drivetrain ยท U660E AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION WIRE

TRANSMISSION WIRE > INSTALLATION

for Preparation Click here



1. INSTALL TRANSMISSION WIRE


    C142570E02
  1. Coat the O-ring with ATF.
    Text in Illustration 
    *1
    O-ring

  1. Coat the bolt with ATF.

  1. Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }

  1. Install the transmission wire to the clamp.

  1. Connect the 9 connectors.



2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY