CAN COMMUNICATION SYSTEM > SYSTEM DIAGRAM |
| OVERALL CAN BUS DIAGRAM (for LHD) |
The CAN communication system is composed of 2 buses.

| *1 | V Bus | *2 | Sub Bus 1 |
| *3 | V Bus Terminating Resistor | *4 | Sub Bus 1 Terminating Resistor |
| *5 | Combination Meter Assembly (for V Bus) | *6 | AFS ECU*4 (for V Bus) |
| *7 | Airbag Sensor Assembly (for V Bus) | *8 | DLC3 (for V Bus) |
| *9 | Power Steering ECU with Motor Assembly (for V Bus) | *10 | Main Body ECU (Multiplex Network Body ECU) (for V Bus and Sub Bus 1) |
| *11 | Steering Sensor (for V Bus) | *12 | Air Conditioning Amplifier Assembly (for V Bus) |
| *13 | Clearance Warning ECU Assembly*5 (for V Bus) | *14 | Brake Actuator Assembly (for V Bus) |
| *15 | Smart Key ECU Assembly (Certification ECU)*3 (for V Bus) | *16 |
|
| *17 | ECM (for V Bus) | *18 | Multiplex Tilt and Telescopic ECU*6 (for Sub Bus 1) |
| *19 | CAN No. 5 J/C*6 (for Sub Bus 1) | - | - |
| V BUS (for LHD) |


| SUB BUS 1 (w/ Power Tilt and Power Telescopic Steering Column System for LHD) |

| OVERALL CAN BUS DIAGRAM (for RHD) |
The CAN communication system is composed of 1 bus.

| *1 | V Bus | *2 | V Bus Terminating Resistor |
| *3 | ECM (for V Bus) | *4 | Main Body ECU (Multiplex Network Body ECU) (for V Bus) |
| *5 | Airbag Sensor Assembly (for V Bus) | *6 | Power Steering ECU with Motor Assembly (for V Bus) |
| *7 | Air Conditioning Amplifier Assembly (for V Bus) | *8 | Radio and Display Receiver Assembly (for V Bus) |
| *9 | Steering Sensor (for V Bus) | *10 | Smart Key ECU Assembly (Certification ECU)*1 (for V Bus) |
| *11 | Brake Actuator Assembly (for V Bus) | *12 | Clearance Warning ECU Assembly (for V Bus) |
| *13 | DLC3 (for V Bus) | *14 | Combination Meter Assembly (for V Bus) |
| V BUS (for RHD) |

