ATF TEMPERATURE SENSOR > INSPECTION |
| 1. INSPECT ATF TEMPERATURE SENSOR ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| THO1 - E2 | 10°C (50°F) | 5 to 8 kΩ |
| THO1 - E2 | 25°C (77°F) | 2.5 to 4.5 kΩ |
| THO1 - E2 | 110°C (230°F) | 0.22 to 0.28 kΩ |
| THO1 - Body ground | Always | 10 kΩ or higher |