AIR CONDITIONING PANEL > REASSEMBLY |
| 1. INSTALL HEATER CONTROL SWITCH BOARD |
![]() |
Install the heater control base sub-assembly with the 5 screws.
| 2. INSTALL HEATER CONTROL HOUSING SUB-ASSEMBLY |
![]() |
Engage the 4 claws.
Install the heater control housing sub-assembly to the heater control retainer RH with the 3 screws.
| 3. INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY |
![]() |
Engage the 7 claws.
![]() |
Install the air conditioner panel sub-assembly with the 2 screws.