REAR POWER SEAT CONTROL SYSTEM > OPERATION CHECK |
| CHECK POWER SEAT FUNCTION |
![]() |
Check the basic function.
| *1 | Reclining Function |
Operate the power seat switches and check that seat function operates properly:
| CHECK REAR SEAT MOTOR (RECLINING FUNCTION) |
Check the PTC operation inside the power seat motor.
Choose a power seat function. Operate the rear power seat switch and move the seat as much as possible in one direction. Keep the seat in that position for approximately 60 seconds.
Operate the rear power seat switch again and continue to try to move the seat in the same direction as in the previous step. Measure the amount of time that elapses before current is cut (the sound of the motor stops).
After current has been cut, release the rear power seat switch and wait for approximately 60 seconds.
Operate the same rear power seat switch and move the seat in the opposite direction. Check that the motor operates.