Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for Reclining Seat Type)

REAR SEAT ASSEMBLY (for Reclining Seat Type) > INSPECTION

for Preparation Click here



1. INSPECT REAR SEAT RECLINING ADJUSTER ASSEMBLY LH


    B161051E22
  1. Check the operation of the reclining motor.

    1. Check if the rear seat back moves smoothly when the battery is connected to the reclining motor connector terminals.
      Text in Illustration 
      *a
      Component without harness connected
      (Reclining Motor (Rear Seat Reclining Adjuster Assembly LH))

      Standard:
      Measurement Condition
      Operational Direction
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Backward
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Forward

      If the result is not as specified, replace the rear seat reclining adjuster assembly LH.



2. INSPECT REAR SEAT RECLINING ADJUSTER ASSEMBLY RH


    B161051E22
  1. Check the operation of the reclining motor.

    1. Check if the rear seat back moves smoothly when the battery is connected to the reclining motor connector terminals.
      Text in Illustration 
      *a
      Component without harness connected
      (Reclining Motor (Rear Seat Reclining Adjuster Assembly RH))

      Standard:
      Measurement Condition
      Operational Direction
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Forward
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Backward

      If the result is not as specified, replace the rear seat reclining adjuster assembly RH.