1AZ-FE COOLING > SERVICE DATA |
| Condition | Specified Condition |
| Standard valve opening temperature | 80 to 84°C (176 to 183°F) |
| Standard valve lift | 10 mm (0.394 in.) or more at 95°C (203°F) |
| Item | Condition | Specified Condition |
| Cooling fan motor | Battery voltage applied at 20°C (68°F) | 5.5 to 7.5 A |
| No. 2 cooling fan motor | Battery voltage applied at 20°C (68°F) | 5.5 to 7.5 A |
| Tester Connection | Condition | Specified Condition |
| 3 - 4 | Battery voltage not applied between terminals 1 and 2 | Below 1 Ω |
| 3 - 5 | Battery voltage not applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 4 | Battery voltage applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Battery voltage applied between terminals 1 and 2 | Below 1 Ω |
| Item | Condition | Specified Condition |
| Radiator cap | Standard value (for brand-new cap) | 93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi) |
| Minimum standard value (for used cap) | 78.5 kPa (0.8 kgf/cm2, 11.4 psi) |