Home › Engine / Hybrid System ยท 2GR-FE › ENGINE CONTROL › CAMSHAFT POSITION SENSOR

CAMSHAFT POSITION SENSOR > REMOVAL

for Preparation Click here



1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
(Click here).


2. REMOVE VVT SENSOR
  1. Disconnect the 4 sensor connectors.



    A173735E02
  1. Remove the 4 bolts and 4 sensors.
    Text in Illustration 
    *a
    for Bank 1
    *b
    for Bank 2
    *c
    for Intake Side
    *d
    for Exhaust Side