Home › Engine / Hybrid System ยท 2GR-FE › ENGINE CONTROL › ACCELERATOR PEDAL

ACCELERATOR PEDAL > INSTALLATION

for Preparation Click here



1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
  1. Avoid physical shock to the accelerator pedal sensor assembly.
  2. Do not disassemble the accelerator pedal sensor assembly.



    A254796E02
  1. Temporarily install the accelerator pedal sensor assembly with the 2 bolts.

  1. Tighten the 2 bolts in the order shown in the illustration.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the accelerator pedal sensor assembly connector.