Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM (w/o Smart Entry and Start System)

DTC    B279C    Theft Deterrent System Presence Detection

for Preparation Click here


DESCRIPTION

If an ECM that is incompatible with the engine immobiliser system is installed, the ECM stores this DTC.

DTC No.
DTC Detection Condition
Trouble Area
B279C
An ECM that is incompatible with engine immobiliser system is installed.
ECM

INSPECTION PROCEDURE

NOTICE:
If the ECM is replaced, refer to Service Bulletin.

1.CHECK DTC OUTPUT
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs (Click here).

    Result:
    Result
    Proceed to
    DTC B279C is not output
    A
    DTC B279C is output (for 2AR-FE)
    B
    DTC B279C is output (for 1AZ-FE)
    C



B
REPLACE ECM (Click here)

C
REPLACE ECM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)