BRAKE MASTER CYLINDER (for LHD) > DISASSEMBLY |
| 1. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY |
| 2. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER |
| 3. REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN |
Mount the brake master cylinder sub-assembly in a vise.
![]() |
Using a pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.
| 4. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY |
Remove the brake master cylinder reservoir sub-assembly from the brake master cylinder assembly.
| 5. REMOVE MASTER CYLINDER RESERVOIR GROMMET |
Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir sub-assembly.