HEADLIGHT CLEANER SWITCH > INSPECTION |
| 1. INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| I9-1 (L) - I9-4 (B) | Headlight cleaner switch on | Below 1 Ω |
| Headlight cleaner switch off | 10 kΩ or higher |
Connect a battery positive (+) lead to terminal I9-3 (ILL+) and a negative (-) lead to terminal I9-2 (ILL-).
Check that the headlight cleaner switch assembly illumination comes on.
| *a | Component without harness connected (Headlight Cleaner Switch Assembly) |