STEERING WHEEL > REMOVAL |
| 1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD |
| 2. REMOVE HORN BUTTON ASSEMBLY |
| 3. REMOVE STEERING WHEEL ASSEMBLY |
![]() |
Remove the steering wheel assembly set nut.
| *a | Matchmark |
Put matchmarks on the steering wheel assembly and steering main shaft.
Disconnect the connectors from the spiral cable.
![]() |
Using SST, remove the steering wheel assembly.
| *a | Turn |
| *b | Hold |
| 4. REMOVE STEERING PAD SWITCH ASSEMBLY |
Disconnect the steering pad switch connector from the spiral cable.
![]() |
Remove the 2 screws.
Disengage the claw and 2 pins to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.
![]() |
Remove the 2 screws.
Disengage the claw and 2 pins to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.
| 5. REMOVE CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System) |
![]() |
Remove the 2 screws.
![]() |
Disconnect the connector and remove the cruise control main switch.
| 6. REMOVE CRUISE CONTROL SWITCH WIRE (w/ Cruise Control System) |
Remove the cruise control switch wire.
| 7. REMOVE LOWER STEERING WHEEL BOSS COVER |
![]() |
Disengage the 6 claws and 2 guides to remove the lower steering wheel boss cover from the steering wheel sub-assembly.
| 8. REMOVE STEERING SHAKE DAMPER |
![]() |
Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.