FRONT SUSPENSION MEMBER > INSTALLATION |
| 1. INSTALL HOLE PLUG |
Install each hole plug to the front frame assembly.
| 2. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH |
![]() |
Temporarily install a new front suspension member body mounting rear cushion LH while confirming the installation direction.
| *a | View from Underneath |
![]() | Front of Vehicle |
![]() |
Install SST as shown in the illustration.
| *1 | Front Suspension Member Body Mounting Rear Cushion LH |
![]() |
Using SST, install the front suspension member body mounting rear cushion LH as shown in the illustration.
| *a | Hold |
| *b | Turn |
| 3. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH |
![]() |
Temporarily install a new front suspension member body mounting rear cushion RH while confirming the installation direction.
| *a | View from Underneath |
![]() | Front of Vehicle |
Install SST using the same procedure as for the front suspension member body mounting rear cushion LH.
Using SST, install the front suspension member body mounting rear cushion RH.
| 4. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION |
![]() |
Temporarily install a new front suspension member body mounting front cushion while confirming the installation direction.
| *a | View from Underneath |
![]() | Front of Vehicle |
Install SST using the same procedure as for the front suspension member body mounting rear cushion LH.
![]() |
Using SST, install each front suspension member body mounting front cushion as shown in the illustration.
| *a | Hold |
| *b | Turn |
| 5. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER |
Install the 2 front suspension member body mounting rear stoppers to the front frame assembly.
| 6. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER |
Install the 2 front suspension member body mounting front stoppers to the front frame assembly.
| 7. INSTALL FRONT SUSPENSION MEMBER DYNAMIC DAMPER |
Install the front suspension member dynamic damper to the front frame assembly with the 2 bolts.
| 8. INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH |
Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.
![]() |
Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.
| 9. INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH |
| 10. INSTALL STEERING LINK ASSEMBLY |
Install the steering link assembly with the 2 bolts and 2 nuts.
| 11. INSTALL FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY |
Install the front stabilizer bar with 2 front stabilizer link assemblies to the front frame assembly.
| 12. INSTALL FRONT NO. 1 STABILIZER BRACKET LH |
Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts.
| 13. INSTALL FRONT NO. 1 STABILIZER BRACKET RH |
| 14. INSTALL ENGINE MOUNTING INSULATOR LH |
| 15. INSTALL ENGINE MOUNTING INSULATOR RH |
| 16. INSTALL FRONT ENGINE MOUNTING INSULATOR |
| 17. INSTALL FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE) |
| 18. INSTALL FRONT FRAME ASSEMBLY |