REAR BUMPER > INSTALLATION |
| 1. INSTALL REAR BUMPER ASSEMBLY |
w/ TOYOTA Parking Assist-sensor System:
Connect the connector.
![]() |
Engage the 6 claws.
![]() |
Engage the 7 claws and install the rear bumper assembly as shown in the illustration.
![]() |
Install the 2 screws.
Install the 6 screws.
Install the 2 clips.
| 2. INSTALL REAR BUMPER PLATE LH |
![]() |
Engage the hook.
| *1 | Hook |
Engage the 2 claws to install the rear bumper plate LH.
| 3. INSTALL REAR BUMPER PLATE RH |