Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE

NAME PLATE > REMOVAL

for Preparation Click here


HINT:
When removing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature 
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate or Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, name plates or emblem excessively.



1. REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM


    B282054E01
  1. Put protective tape around the luggage compartment door emblem.
    Text in Illustration 
    *1
    Protective Tape

  1. Using a moulding remover, peel off the double-sided tape and disengage the 2 pins to remove the luggage compartment door emblem.

    NOTICE:
    1. If reusing the luggage compartment door emblem, take care not to damage the luggage compartment door emblem.
    2. Be careful not to damage the vehicle body.



2. REMOVE NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE


    B282056E01
  1. Put protective tape around the No. 7 luggage compartment door name plate.
    Text in Illustration 
    *1
    Wooden Block
    *2
    Piano Wire
    *3
    Protective Tape

  1. Insert a piano wire between the vehicle body and No. 7 luggage compartment door name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and cut the double-sided tape that holds the No. 7 luggage compartment door name plate to the vehicle body.

    NOTICE:
    1. If reusing the No. 7 luggage compartment door name plate, take care not to damage the No. 7 luggage compartment door name plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the No. 7 luggage compartment door name plate.



3. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE


    B282057E01
  1. Put protective tape around the No. 2 luggage compartment door name plate.
    Text in Illustration 
    *1
    Wooden Block
    *2
    Piano Wire
    *3
    Protective Tape

  1. Insert a piano wire between the vehicle body and No. 2 luggage compartment door name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and cut the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.

    NOTICE:
    1. If reusing the No. 2 luggage compartment door name plate, take care not to damage the No. 2 luggage compartment door name plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the No. 2 luggage compartment door name plate.



4. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE


    B282058E01
  1. Put protective tape around the No. 3 luggage compartment door name plate.
    Text in Illustration 
    *1
    Wooden Block
    *2
    Piano Wire
    *3
    Protective Tape

  1. Insert a piano wire between the vehicle body and No. 3 luggage compartment door name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and cut the double-sided tape that holds the No. 3 luggage compartment door name plate to the vehicle body.

    NOTICE:
    1. If reusing the No. 3 luggage compartment door name plate, take care not to damage the No. 3 luggage compartment door name plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the No. 3 luggage compartment door name plate.