Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR BUMPER PAD LH


    B282079
  1. Remove the rear bumper pad LH.



2. REMOVE REAR BUMPER PAD RH


    B282078
  1. Remove the rear bumper pad RH.



3. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    B282091
  1. Remove the screw.

  1. Disengage the guide and remove the reflex reflector assembly LH.



4. REMOVE REFLEX REFLECTOR ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



5. REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)


    B282083
  1. Disengage the 4 clamps.

  1. Disconnect the 4 connectors and remove the No. 2 luggage room wire.



6. REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)


    E228017E01
  1. Disconnect the connector.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side

  1. Disengage the clamp.



    E228018E01
  1. Disengage the 4 claws to remove the ultrasonic sensor clip.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side



7. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)


    E228019E01
  1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side



8. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)


    E228020E01
  1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side



9. REMOVE REAR BUMPER SIDE RETAINER LH


    B280046
  1. Remove the 3 screws.

  1. Disengage the 6 claws and remove the rear bumper side retainer LH.



10. REMOVE REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.



11. REMOVE WHEEL HOUSE REINFORCEMENT LH


    B280052
  1. Remove the screw and nut.

  1. Disengage the clip and remove the wheel house reinforcement LH.



12. REMOVE WHEEL HOUSE REINFORCEMENT RH

HINT:
Use the same procedure as for the LH side.



13. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY


    B282090
  1. Remove the 6 nuts and rear bumper reinforcement sub-assembly.