Home › Vehicle Exterior › MIRROR (EXT) › OUTER MIRROR SWITCH

OUTER MIRROR SWITCH > REMOVAL

for Preparation Click here



1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B281681
  1. Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.

  1. Disconnect each connector and remove the multiplex network master switch assembly with front door armrest base panel.



2. REMOVE OUTER MIRROR SWITCH ASSEMBLY


    B293468
  1. Disengage the 4 claws and remove the outer mirror switch assembly.