Home › Vehicle Exterior › LIGHTING (EXT) › FOG LIGHT ASSEMBLY

FOG LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL FOG LIGHT ASSEMBLY
  1. Engage the 2 guides to temporarily install the fog light assembly.

  1. Install the fog light assembly with the screw.

    Torque:
    1.6 N*m{ 16 kgf*cm , 14 in.*lbf }

  1. for TMC Made:

    1. Connect the connector.



2. INSTALL FRONT BUMPER ASSEMBLY
(Click here)