Home › Vehicle Exterior › LIGHTING (EXT) › AFS OFF SWITCH

AFS OFF SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT SWIVEL MAIN SWITCH (AFS OFF SWITCH)
  1. Engage the 2 claws to install the headlight swivel main switch (AFS OFF switch).



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B280330
  1. Temporarily install the instrument cluster finish panel assembly as shown in the illustration.

  1. Connect each connector.

  1. for LHD:

    1. Engage the 3 claws, 7 clips and 4 guides.

  1. for RHD:

    1. Engage the 4 claws, 5 clips and 4 guides.



    B283375
  1. Engage the 4 clips and 2 guides to install the instrument cluster finish panel assembly.



3. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    B280325
  1. Engage the 4 clips to install the No. 1 instrument panel register assembly.



4. INSTALL INSTRUMENT SIDE PANEL
  1. Engage the 3 guides.



    B280321
  1. Engage the 4 claws to install the instrument side panel LH as shown in the illustration.



5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP


    B278980E01
  1. Align the alignment mark (Yellow) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.
    Text in Illustration 
    *1
    Alignment Mark (Yellow)

    NOTICE:
    After installation, check that the corners fit correctly.



6. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

NOTICE:
Reset the auto away/return function setting to the previous condition by changing the customize parameter (Click here).