Home › Vehicle Exterior › LIGHTING (EXT) › AFS ECU

AFS ECU > INSTALLATION

for Preparation Click here



1. INSTALL AFS ECU
  1. Engage the 2 guides.

  1. Install the AFS ECU with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Engage the clamp.

  1. Connect the connector.



2. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
(Click here)


3. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL
(Click here)


4. ADJUST HEADLIGHT AIMING
(Click here)