Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY

REAR LIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE BACK-UP LIGHT BULB


    E227534
  1. Turn the rear light socket and wire with the back-up light bulb in the direction indicated by the arrow shown in the illustration and disconnect them as a unit.

  1. Remove the back-up light bulb from the rear light socket and wire.



2. REMOVE TAIL LIGHT BULB


    E227536
  1. Turn the rear light socket and wire with the tail light bulb in the direction indicated by the arrow shown in the illustration and remove them as a unit.

  1. Remove the tail light bulb from the rear light socket and wire.



3. REMOVE NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)


    E227538
  1. Disengage the clamp.

  1. Turn the rear light socket and wire with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration and remove them as a unit.

  1. Remove the No. 1 rear fog light bulb from the rear light socket and wire.



4. REMOVE REAR LIGHT GASKET


    E227540
  1. Remove the rear light gasket.

    NOTICE:
    1. Be sure to remove all the traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.