NAVIGATION ANTENNA > INSTALLATION |
| 1. INSTALL NAVIGATION ANTENNA ASSEMBLY |
Engage the 2 clamps.
Install the navigation antenna assembly with the 2 screws.
| 2. INSTALL DEFROSTER NOZZLE ASSEMBLY |
![]() |
Engage the 2 guides.
Install the defroster nozzle assembly with the 3 screws <C>.
| 3. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Engage the 2 claws.
Install the No. 1 side defroster nozzle duct with the screw <C>.
| 4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Engage the 2 claws.
Install the No. 2 side defroster nozzle duct with the screw <C>.
| 5. INSTALL NO. 3 HEATER TO REGISTER DUCT (for LHD) |
![]() |
Install the No. 3 heater to register duct with the 3 screws <C>.
Install the clip.
| 6. INSTALL HEATER TO REGISTER DUCT ASSEMBLY (for RHD) |
Engage the heater to register duct assembly to the ion generator assembly.
![]() |
Install the heater to register duct assembly with the 3 screws <C>.
Install the clip.
| 7. INSTALL NO. 1 HEATER TO REGISTER DUCT (except LHD with Ion Generator) |
![]() |
Install the No. 1 heater to register duct with the 3 screws <C>.
Install the clip.
| 8. INSTALL HEATER TO REGISTER DUCT ASSEMBLY (for LHD with Ion Generator) |
Engage the heater to register duct assembly to the ion generator assembly.
![]() |
Install the heater to register duct assembly with the 3 screws <C>.
Install the clip.
| 9. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY |