Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

DTC    U0073    Sending Malfunction (Navigation to APGS)

DTC    U0100    Lost Communication with ECM / PCM "A"

DTC    U0140    Lost Communication with Body Control Module

DTC    U0155    Meter ECU Communication

for Preparation Click here


DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC No.
DTC Detection Condition
Trouble Area
U0073
CAN bus connection error
CAN communication system
U0100
CAN reception error
U0140
CAN reception error
U0155
CAN reception error

INSPECTION PROCEDURE

1.CHECK DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.



NG
GO TO CAN COMMUNICATION SYSTEM (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)